When your washer or dryer breaks down in Boise, you are not doomed to go to the laundromat day after day until the repairman arrives. You can choose the reliable and affordable appliance repair in Boise provides same-day service.
Our certified technicians carry the tools, have the training, and have years of experience to carry out both common and unusual repairs during a single service appointment. We load up our vans with the manufacturer parts needed for all major brands of dryers and washers including GE, Sears, Carrier, LG, Kenmore, Goodman, Lennox, Bryant, Armstrong, RCA and more!
PHONE: (208) 314-9361
The most common reason we get called for washer repairs is a loud noise from the appliance. We will come out the same day and diagnose the reason for the loud noise and either repair it or replace the broken part. Broken pump motors, worn belts, or damaged bearings are the usual culprits. We carry the parts and tools to fix all of these issues on the spot.
WON’T TURN ON/AGITATE
Whenever your washing machine does not turn on make sure it is plugged in and the circuit breaker is in the on position. If you have to call us the problem is probably a broken timer, door latch, or thermal fuse. When your washer does not agitate, you have damaged and non-functioning agitator cogs, a broken coupler, a worn out or broken drive belt or the transmission needs to be repaired or replaced.
When your washer will not spin, call us for same-day repairs. This problem happens when a motor coupling is bad, a door latch is broken, or the wax motor is not working properly. These are all quick fixes once we arrive for a service call.
When your washer overflows, turn it off, mop up the floor, and call us for same-day repairs. You have a damaged water inlet valve, air dome tube, or water level pressure switch. We fix these problems on all major brands of washers.
NO HOT/COLD WATER
When the washer will not produce either hot or cold water you have a broken temperature control switch or the inlet hose is damaged. Call us and we will fix the problem on the spot.
When your dryer is making loud noises you need to call us before the problem gets worse and your dryer does not work at all. Most commonly the noise is because of a worn belt, a damaged seal, or a broken bearing. All of these are easy fixes on the same day that you call.
NO HEAT/WON’T DRY
When your dryer does not heat up properly, you have a broken cycling thermostat, heating element, or high limit thermostat. The same parts can also cause your dryer to get too hot. Our certified repairman will inspect the dryer and fix your problem on a short service call.
WON’T TURN ON/TUMBLE
If your dryer does not turn on, make sure that the circuit breaker is on and the machine is plugged in. The high limit thermostat, heating element, and cycling thermostat are the usual reasons for these problems. We carry the parts to fix these issues on a short service visit the same day you call.
WON’T TURN OFF
When your dryer does not turn off you have a bad timer or the door switch is broken. Call us instead of getting in the habit of unplugging the machine! These are quick fixes on a short service call.
TIMER WON’T ADVANCE
When your dryer does not advance through its normal cycle there is a broken cycling thermostat or a broken timer motor. Call us for a same day visit and repairs.
Copyright © 2019 | SITEMAP